1
4
EG
NOTES
Sweep function
The flap starts moving up and down to deliver air
over the sweep range.
• The flap automatically closes when the unit
is off.
• During the heating operation the flap position
changes according to the settings specified
with the remote control.
• Use the FLAP button on the remote control to adjust
the position of the flap. If you move the flap by hand,
the factual flap position and the flap position on the
remote control may no longer match. If this should
happen, shut off the unit, wait for the flap to close,
and then turn on the unit again; the flap position will
now be normal again.
CAUTION
Use the service pipe (10) for the drainage of dripping water during the installation.
At the end of the operation close the tube with its stopper.
SERVICE PIPE
IMPORTANT
If you want to use the service pipe as principal condensation water
discharge, follow the instructions on page number 5.
10
Summary of Contents for REVE 235RH2O
Page 97: ...7 GR ...
