background image

 6

Basic Reference 

 
 
 

 

 

 

 

 

Male XLR 5-pin Data Input            

Fuse Holder   

Female XLR 5-pin Data Output 

 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

      

    

 

 

                               

                           

Power Input 
  
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital LCD Display 
                               

                            

                               

                            

       
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
 

      Menu 

Setting 

Buttons 

 

 

 

Setup and Operation Modes (LCD Display) 

 

This fixture includes two special lens frames: a 15 and a 25 degree. Without a 
lens installed, the fixture will produce a wide 60 degree beam. The lens frames 
can be used to change the output beam of the fixture. By using certain light 
diffusers, it is possible to create different desired lighting effects.  A desired 
effect might be a softer or diffused light beam. Many diffraction materials are 
available to create different beam angles with minimal light output losses.  

 
The following refers to the different modes that are available on this fixture via the LCD Control 
Panel display. All functions are selectable from the display menu located at the back of the 
fixture. 
 

Note

: The actual fixture may vary from the illustrations shown in this manual. 

Summary of Contents for FlexiLED Series













Reviews: