6
Basic Reference
Digital LED Segment
Fuse Holder
Display
Menu Setting Buttons
Female XLR 3-pin Data
Male XLR
Output
3-Pin Data
Input
Setup and Operation Modes (LED Display)
This fixture includes a filter frame. This frame can be used to hold a gel or filter
to better assist in controlling your light beam. By using certain filters, it is
possible to create different desired lighting effects. A desired effect might be a
softer or diffused light beam. This can be achieved by using a frosted gel
within the provided frame. Many diffraction materials are available to create
different beam angles with minimal light output losses.
The following refers to the different modes that are available on this fixture via the LED display.
Each mode is selectable from the display menu located at the back of the fixture. Modes 1 to 5
refer to the stand-alone operations that are available. Modes 1-4 do not require any data line to
be connected to the fixture to function. However, Mode 5 and Mode 6 require data cables to be
used. Mode 6 refers to the DMX controlled operation.
NOTE: When the LED display digit is flashing, you may select this mode and change the
setting by using the UP/DOWN keys to choose. After making your choice, press ENTER
to accept and save your setting.
Using the MODE key, press it until you reach the desired mode below. By entering such mode,
settings can be made to each function within the mode. These function options are explained
below. The last two digits are the level or speed of such selected mode.
