8
P7 FLOW 2
Speed 00-99 Flash 00-99
Seven color chase in 2 directions
Speed & Flash strobe adjustable
P8 FLOW 3
Speed 00-99 Flash 00-99
Seven color relay chase in 1 direction
Speed & Flash strobe adjustable
P9 FLOW 4
Speed 00-99 Flash 00-99
Seven color relay chase in 2 direction
Speed & Flash strobe adjustable
P10 FLOW 5
Speed 00-99 Flash 00-99
Seven color chase from two sides to middle
Speed & Flash strobe adjustable
P11 FLOW 6
Speed 00-99 Flash 00-99
Seven color chase from middle to two sides
Speed & Flash strobe adjustable
P12 FLOW 7
Speed 00-99 Flash 00-99
Seven color chase
Speed & Flash strobe adjustable
P13 FLOW 8
Speed 00-99 Flash 00-99
C1: BLACK-RGB C2: BLACK-RGB
Two color chase in 1 direction
Speed & Flash strobe adjustable
Blackout, Red-Green-Blue-Yellow-Cyan-Purple-White
P14 FLOW 9
Speed 00-99 Flash 00-99
C1: BLACK-RGB C2: BLACK-RGB
Two color chase in 2 directions
Speed & Flash strobe adjustable
Blackout,Red-Green-Blue-Yellow-Cyan-Purple-White
Auto Run Operation
In Auto Mode the programs are called up automatically in a continuous loop.
Press the MODE button to select the AUTO Mode. Press the ENTER button to select the
desired frequency of the loops. The desired frequency of the loops (Frequency = FQN
01-99) can be selected using the UP/DOWN buttons. Please press the ENTER button to
confirm and to exit the AUTO Mode.
Slave Operation
The master/slave operation enables several LED bars to be synchronized and controlled
by one master device. For slave operation to function, XLR data cables must be used to
connect fixtures together. To set this mode, press the MODE button to select the SLAVE
mode. Any devices set in this manner can now be controlled by the master unit. Press
the ENTER button to confirm and to exit the SLAVE Mode.
Sound Active Operation
Press MODE button until you reach the SOUND controlling mode, then the fixture will
respond to the sound of audio. Press UP/DOWN to adjust the sound sensitivity levels
(SENS00-31) & frequency (FQN01-99) of loops. Press the ENTER button to select the
desired sensitivity and frequency of the loops, respectively. Press the ENTER button
again to confirm and to exit the SOUND Mode.
Invert Function
Press MODE button until you reach FLOW INVERT mode. Press Enter, then select
ON/OFF. This will adjust the flow running effect from left to right or right to left.