7
Control Panel Menu
Use the fixture’s Control Panel to access the Control Menu. The MODE Key puts the
fixture in the settings menu itself and also acts as a BACK key between options,
UP/DOWN moves through the menu options and allows the assignment of a value. The
ENTER key is used to enter that option and confirms the selection once the UP/DOWN
is used to adjust the value. When in edit, the display will Flash. Settings are stored and
recalled on subsequent power cycles. R, G, B refers to Red, Green, and Blue
respectively. DMX and master/slave modes require data cables to be connected between
fixtures. Manual and some stand-alone modes do not require data cables for
independent use of the fixture. The display will shut off after 30 seconds, press any
button to relight it.
Note:
The factory default CHANNEL MODE is set to “06” the 6 channel DMX mode.
DMX-512 Control
Fixtures require a "Start Address" from 1 to 512, setting the first DMX channel containing data
for the fixture (see DMX Background). Before addressing fixtures, consult the manual of the
system’s DMX controller to select a desirable addressing scheme. Valid Start Addresses range
from 1 to 512. Fixtures requiring more than one channel for control will read subsequent
channels up to the total number of channels required. Since this fixture requires a maximum of
6 channels of DMX, if set to a Start Address of 7 it would use data from channels: 7, 8, 9, 10, 11
and 12. Choose a Start Address so the channels used do not overlap with other fixtures. In
some cases, it may be desirable to set two or more same type fixtures to the same Start
Address. In this case, the fixtures will be slaved together and respond to the same data.
Because all fixtures see the same data, fixtures may be set to any address without concern for
the order they are connected by the DMX cables.
Menu Options
Function
Options
DMX MODE
ADDR
Select DMX Start Address
001-512
CHANNEL
Select Number of DMX Operating Channels
CH:
03 = 3 ch, 05 = 5 ch or 06 = 6 channels
STATIC
Allows a static scene to be set
R00G00B00 F00
set R 0-255, G 0-255, B 0-255
F Flash speed from 00 to 99
CHANGE-7
7 Color change scroll
SP01-99 F00-99
Sets color change speed from 01-99
Set flash speed from 00-99
CHANGE-3
3 Color change scroll
SP01-99 F00-99
Sets color change speed from 01-99
Set flash speed from 00-99
DREAM
7 Color fading
SP01-99 F00-99
Sets color change speed from 01-99
Set flash speed from 00-99
MASTER/
SLAVE MODE
Selects master or slave mode
MASTER
: master fixture
SLAVE
: slave fixture
