6.
Replace bulbs and protector with those that meet proper specifications.
7.
The lamp shall be changed if it has become damaged or thermally deformed.
8.
Please be sure to mount fixtures only as shown on the picture below, hanging on the bracket as shown. Use proper
clamping device to attach to pipe or truss. Safety cables are always suggested.
9.
No open flame sources, such as lighted candles, should be placed on or in the fixture.
10.
The fixture is intended for indoor use only. Do not expose to water or any type of fluid substances. For dry use only.
11.
Never leave this unit on for more than 15 minutes continuously. Unit does not have power switches, it must be turned
on and off from a dimming system or from external circuit switches.
V. Drawing reference for clamp installation:
(clamps and safety cables sold separately)
For more information visit: www.techni-lux.com
Clamp eg. Steel “C” or “S”
Screw M8x20mm
Steel wireФ3mm or equipment chain
