TEP-1560-BSW HARDWARE MANUAL
– VER 1.00 MAR 25 2019
Page
13
of
39
3.4. USB OTG (Type-C) Connector
The TEP-1560-BSW has one USB OTG Type-C connector (USB 2.0 and USB 3.0 signals) that can be
used to connect a host computer to the unit for programming and update purposes.
Pin
#
Signal
Description
Pin
#
Signal
Description
A1
GND
Ground
B1
GND
Ground
A2
TX1+
SS differential pair #1 signal
B2
TX2+
SS differential pair #3 signal
A3
TX1-
B3
TX2-
A4
VBUS
5V Universal Serial Bus Power
B4
VBUS
5V Universal Serial Bus Power
A5
CC1
OTG detection signal port 1
B5
CC2
OTG detection signal port 2
A6
USB_D+ USB differential pair signal
port 1
B6
USB_D+ USB differential pair signal
port 2
A7
USB_D-
B7
USB_D-
A8
SBU1
Sideband use port 1
B8
SBU1
Sideband use port 2
A9
VBUS
5V Universal Serial Bus Power
B9
VBUS
5V Universal Serial Bus Power
A10
RX2-
SS differential pair #4 signal
B10
RX1-
SS differential pair #2 signal
A11
RX2+
B11
RX1+
A12
GND
Ground
B12
GND
Ground
3.5. Gigabit Ethernet Interface (LAN1/LAN2)
The TEP-1560-BSW comes with two Gigabit Ethernet RJ45 connectors. LAN1 connector can support
802.3at Power over Ethernet functionality if configured with the PoE power option (TEP1010-xxxxx-Rxx-
LPOE
-xxxx-xxxx-xxx-xxxx-xxxx) by connecting it to an 802.3at compliant PoE switch or power injector.
LAN1 / LAN2:
Pin #
1000 Mbps
100 Mbps
10 Mbps
1
MDI0+
Transmit Data+
Transmit Data+
2
MDI0-
Transmit Data-
Transmit Data-
3
MDI1+
Receive Data+
Receive Data+
4
MDI2+
5
MDI2-
6
MDI1-
Receive Data-
Receive Data-
7
MDI3+
8
MDI3-
3.6. USB 2.0 Host Connectors
The TEP-1560-BSW has two USB 2.0 Host connectors (USB 2.0 signals only) to connect to a USB
peripheral such as a keyboard, mouse, USB storage device or USB hub.
