AIMA3000.RRAS/G/R Product User Manual
Technetix Group Limited
•
technetix.com
Jan/2018 - V2
37
6.9 Module Removal
1.
Disconnect the optical cables from the front panel of the module and place dust caps on the exposed ports.
2. Unscrew the module retaining screw until it releases.
3. Gently press the orange retaining clip to release the hinged tab.
4. Lift the hinged tab to remove the module from the multi-pin connector.
5. Carefully use the hinged tab to initially pull the module out of the chassis.
6. Then, grasp the module’s casing and continue to remove the module from the chassis.
CAUTION!
DO NOT completely pull the module only by the hinged tab, to avoid damage. Once the module is removed from the
chassis, secure the hinged tab in the closed position behind the orange tab-retaining clip.
Note:
A module can be removed from or inserted into the AIMA3000 chassis while power is being supplied to the AIMA3000.
Always place protective dust caps on all optical connectors when not in use.
Summary of Contents for AIMA3000
Page 65: ...technetix com Jan 2018 V2...
