AIMA3000.RT5S Product User Manual
Technetix Group Limited
•
technetix.com
May/2016 - Version 1.0
30
4. With a computer connected to the ASMM module’s network, select the port for the transmitter that needs to be
adjusted. Select
"Port 1"
for RF1 and
"Port 2"
for RF2 from the left bar under the RT5S being configured. Confirm
that the
“Input AGC mode”
is set to
“OFF”
, if not change it to
“OFF”
and then click on
“Submit”
button. In
addition, confirm that the
“RF-1”
and
“RF-2”
fields are set to 0.0, if not set to 0.0 and click on
“Submit”
button.
5. Confirm in the management
“Status”
section that the RF levels and the RF Composite Input Power are within the
designated parameters. If both RF1 and RF2 inputs are used
"Port 1"
and
"Port 2"
pages need to be checked on
the web interface.
6. Confirm that the
"Alarm Control"
are enabled. Check the required selection and click on
“Submit”
to enable/ .
disable alarms.
