AIMA3000.FT5X Product User Manual
Technetix Group Limited
•
technetix.com
May/2016 - Version 1.0
27
5.6 Test the RF Input Signal
After the input signal has been confirmed, the optical power of the associated optical output port should be tested.
Use the optical power meter to test the output levels; the output values should be in accordance with the technical
specifications.
Before testing, the optical power meter must be calibrated. Before measuring optical signals, verify the interfaces are clean
and undamaged.
CAUTION!
The device output optical power measurement procedure and regular maintenance must be performed
by highly trained personnel. All procedures and maintenance must be comply with the necessary safety
precautions indicated with using FT5X optical transmitter module.
WARNING!
Module emits an invisible laser when working. Avoid direct contact with the laser connector. DO NOT look
directly at the fibre connector.
