AIMA3000.FRAS Product User Manual
Technetix Group Limited
•
technetix.com
May/2016 - Version 1.0
26
DO NOT remove the dust cap from the fibre connector until right before connecting it to the input port.
4. Raise the clip, insert the fibre connector, and then lower the clip over the connector.
When using the sliding guide, put the fibre connector in the clip and slide it in from the rear to the front, through the
chassis. Ensure that the optical fibre tail does not become trapped or pulled tightly.
Fibre clip (at rear, for up to two connectors)
Handle (at front)
