Wire Connection
Follow the connection diagram of the control box.
1 Control Box
5 Sensor D
2
– Black to Ground
6 Sensor C
3 + Red to Reverse light
7 Sensor B
4 Display with sound
8 Sensor A
Attach the black cable of the
power cable to the car’s ground
(negative) or the negative of the reverse light.
Attach the red cable of the power cable to the positive cable of
the reverse light. If necessary remove the wire isolation before
connecting.
To attach the power cable to the positive and negative
cables of your car we suggest cable connector for each wire. After
connecting, wrap connection with electrical tape to prevent a short-
circuit.
NOTE:
Check for correct wire before cutting and wiring.
Control Box Connection
Plug the power cable into the Control Box slot which is red.
Plug the display cable into Control Box slot which is blue.
After testing the sensors, place and fix steadily the Control Box in
your
car’s trunk, depending where you connect the power cable to
the reverse light.
NOTE:
Power cable, sensor cables and display cable must be laid
to the position of the Control Box.
