9
Get started
System Installation and Wiring
These installation instructions do not apply to all types of vehicles.
They are meant only as a general guide due to the large number of
vehicle makes and models. Consult your local motor vehicle laws on
the use of this product to be sure it is permitted.
Through installation of this Car Alarm system, you should be sure as
to not degrade, damage or compromise the safety of any system or
device on your vehicle.
Improper installation and wiring of the external siren may damage the
vehicle's electrical system, including vital vehicle computer and
operating systems. That could lead to an accident or causing property
damage and/or serious personal injury. It is highly recommended to
seek professional installation advice from a qualifed auto electrician
or, in the alternative, to have the installation performed by a qualifed
auto electrician.
Please ensure that external siren is secured and mounted where it
would NOT obstruct any OEM vehicle safety features. In an event of
an accident, manufacturer is not responsible for bodily injury or
vehicle damage caused by the external siren being a projectile.
The manufacturer assumes no liability for damage caused to your
vehicle due to improper installation or use.
This unit is designed to operate on a 12V or 24V DC negative ground
electrical system. Connecting to other types of electrical systems will
cause damage to your vehicle. Please contact the manufacturer if you
are unaware of the system type in your vehicle.
If you have no experience in installing electrical devices on vehicles,
you are not allowed to carry out the following work yourself. Have the
assembly and connection carried out by qualified specialists.
Connecting incorrectly may result in voltage high enough to cause
electrocution
