Page 12 of 32
IU_TechMaster_02_eng
Power up TechMaster and access the Master Menu.
Press
three times. LCD will display the message:
MANAGERS
MANAGEMENT
Press
. LCD will display the message:
1: MANAGER
ü
2: OVR MANAGER
ü
Select the Manager entering his number and press
to confirm.
LCD will display the message:
01
ü
T1
DISABLE?
Press
to select the operation: enable, disable, delete or exit and
press
to confirm.
01
ü
T1
DELETE?
Press
to confirm. LCD will display the message:
OPERATION
DONE
1.5 Dynamic Codes
Depending on lock configuration this menu could not be available
Use this function to enable or disable the use of Dynamic Codes on the lock.
Power up TechMaster and access the Master Menu.
Press
four times. LCD will display the message:
DYNAMIC
CODES
Press
. LCD will display the actual status:
STATUS:
DISABLED/ENABLED
Press
. LCD will display the message:
STATUS:
ENABLE?/ DISABLE?
Press
to confirm.
OPERATION
DONE
If you want to disable the use of Dynamic Codes from all the locks
press
until LCD will display the message:
STATUS:
REMOVE FROM ALL
Press
to confirm and remove the use of Dynamic Codes from all
the locks.
OPERATION
DONE
If the use of Dynamic Codes has been removed and you want to activate it again, be sure
Dynamic Code option is enabled on the lock and use the Red Dallas and the key activation
code generated by the software to activate the function.
