FAQ
Q: TV display “Waiting for connection” on the right corner? AvPlease check if the power supply of TX
(Sender) and switcher (if used) is connected, and make sure connecting cable is firmly.
Q: TV display “Signal loss”?
A: 1) please check if there is a HDMI signal input of TX.
2) Try to connect the signal source directly to display device to see if there is signal output from
source device or change the signal source, HDMI wire and try again.
Q: Display not fluent, not stable?
A: 1) Please check the cable length between the TX to switch, the switch to the RX and the connection
between each level is within the required range.
2) Click the “reset” button on the TX/RX front panel, reset and reconnect.
TECHNICAL SPECIFICATIONS
HDMI Signal
Compatible with HDCP
Video encode
H.264
Bandwidth
18Mbps
Support resolutions
480i@60Hz, 480p@60Hz, 576i@50Hz,
576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz,
1080p@50/60Hz
Network Cable
UTP/STP Cat5/5e/6
Transmission distance
Up to 120 meters transmission distance for
1080p Full HD over single CAT6
IR signal
Supports 20~60KHz IR devices
Working Temperature
0°C~60C°
Power Supply
DC5V/1A
Power Consumption
TX:3.5W; RX: 3W
Dimensions
130(W) x 84(D) x 23.2(H) mm*2PCS
The product is compliance with EMC Directive 2004/108/EC
and ROHS Directive 2011/65/EU
This product is marked with this symbol. It means that used electrical and electronic
products should not be mixed with general household waste.
There is a separate collections system for these products in compliance with EU
Directive WEEE
6
WWW.TECHLY.COM
HDMI SPLITTER/ EXTENDER OVER
SINGLE CAT5E/6 WITH IR
