19
No response from the
control panel when
operating on the
keypad
The keypad is not
registered in the
control panel.
Register the keypad
in the control panel
by following the
instructions in this
manual.
The keypad is
installed too far from
the control panel.
Install the keypad
and the control panel
closer to each other.
It is recommended
to buy a repeater
to expand the
transmission distance.
Cannot disarm the
system by RFID tag.
The RFID tags have
not been registered in
the keypad.
Register the RFID tag
in the control panel
according to the
instructions in this
manual.
The RFID reader is
disabled.
Enter Setup mode and
activate the function
"Enable/Disable
deactivation by RFID
tag".
The keypad is locked.
Press Arm or Home
Mode then [*] before
disarming.
The keypad cannot be
set up.
The keypad is not
unlocked.
Refer to instructions
in this manual.
The keypad does not
switch to Setup mode.
Refer to instructions
in this manual.
The keypad cannot
arm, disarm or switch
to Home Mode.
Your user code or
admin code has not
been typed before
each operation.
Type your user code
or admin code before
operation.
