8
Register the keypad in the control panel
Make sure the control panel is in Connection mode (re-
fer to the user’s manual of your alarm system)
Press Arm [ ] or Home Mode [ ]
on the keypad to unlock it.
Type your usercode or admin
code on the keypad, and then
press any of the Arm [ ], Dis-
arm [ ] or Home Mode [ ]
keys. Your hear short beeps: the
registration has succeeded.
Default admin code: 123456. Defaut user code: 1234
The control panel of your alarm system can be con-
trolled from distance on the keypad once the latter has
been registered in the control panel.
Connect the keypad to a siren
The keypad can be connected to an indoor or outdoor
siren, which enables you to trigger the siren by pressing
the [
SOS
] key on your keypad.
To connect the keypad to a siren, set the wireless siren
to Connection Mode (refer to the manual of your siren if
necessary). Press the Arm [ ] or Home Mode [ ] key on
the keypad to switch to Normal Mode. Then type [
your
admin code or user code
] and press any of the Arm [ ],
Disarm [ ] or Home Mode [ ] keys on the keypad.
