14
Checking the Installation
On the Host and Client Extender units, check that the Power, Status, and Host LEDs are on and solid. If the Host
or Status LEDs are permanently off, then the cabling between the Host and Client Extender units may not be
installed properly or is defective.
Windows (7/8/8.1/10)
1. Open Device Manager to confirm that the TL-FO-USB3-01 has installed correctly.
2. Expand the entry for Universal Serial Bus controllers by clicking the “+” sign. If the TL-FO-USB3-01 has been
installed correctly, you should find it listed as two “Generic SuperSpeed Hubs” or “3.0 Hubs”.
NOTE: To open Device Manager in Windows 10/8/8.1 or Windows 7: Open the Start menu, right click
on “Computer” then select: Manage >> Device Manager.
