8
Installing the TL-FO-USB3-01 System
Preparing Your Site
Preparing Your Computer
Windows (7/8/8.1/10)
Before you can install the TL-FO-USB3-01, you need to prepare your site:
1. Determine where the computer is to be located and set up the computer.
2. Determine where you want to locate the USB device(s).
3. Ensure fiber optic cabling is in place, prepared, properly terminated, and within the maximum distances as
defined for the cabling standard used.
1. Open Control Panel.
2. Open Power Options.
The TL-FO-USB3-01 does not support suspend modes of operation. As such, your computer should be configured
to not go into “suspend mode” or to “suspend” the USB ports. Please refer to the instructions for your operating
system listed below.
