Street:5C Wendy Ct. Greensboro, NC 27409▪Mailing: PO Box 18542,
Greensboro, NC 27419▪P:336-856-2919▪F:336-217-8838
Email:[email protected]▪Web:www.AdvancedGourmet.com
Distributed By:
P a g e |
13
To unlock the keyboard please operate in the following way:
1.
Make sure that a procedure is not in progress.
2.
Keep the DOWN key and the START / STOP key pressed for 1 second. The display will visualize "UnL"
for 1 second.
i)
Buzzer off
Please operate in the following way:
1.
Make sure that a procedure is not in progress.
2.
Press any key and release.
8) FUNCTIONS OF THE BLAST CHILLER/BLAST FREEZER
8i: PRELIMINARY INSTRUCTIONS
The following types of operation cycles can be managed:
Blast chilling and conservation
Hard blast chilling and conservation
Blast freezing and conservation
Hard blast freezing and conservation.
For further information please consult the following paragraphs.
Every cycle of operation can be preceded by a pre-cooling cycle. Please refer to paragraph 7i: "Pre-cooling."
8ii: BLAST CHILLING AND CONSERVATION
The temperature blast chilling and conservation cycle it is composed by the followings two phases:
blast chilling
conservation
When the first phase finishes the device automatically passes to the following one.
To start the cycle, please operate in the following manner:
1.
Make sure the device is “on”
2.
Make sure that the keyboard is not jammed and that a procedure is not in progress.
3.
Press and release the BLAST CHILLING key: the LED will flash.
4.
4a. If the parameter r19 is set to 0, the display will show the work setting from the blast chilling cycle.
It is also possible to set this value through the parameter r7.
4b. If the parameter r19 is set to 1, the display will show the temperature taken at the end of the blast
chilling cycle. It is also possible to set this value through the parameter r3.
4c. Press and release the UP key or the DOWN key within 15 seconds to modify the value of the
parameter.
