Street:5C Wendy Ct. Greensboro, NC 27409▪Mailing: PO Box 18542,
Greensboro, NC 27419▪P:336-856-2919▪F:336-217-8838
Email:[email protected]▪Web:www.AdvancedGourmet.com
Distributed By:
P a g e |
10
1 display
2 blast chilling key
3 blast freezing key
4 hard blast chilling or soft blast freezing key, then also named “HARD/SOFT key”
5 on/off/start/stop key, then also named “START/STOP key”
6 increase key, then also named “UP key”
7 decrease key, then also named “DOWN key”
For further information, please refer to the following chapters.
7) USER FUNCTIONS
a) Preliminary instructions
The following are the states of the machine:
the state "off" (the device is not fed).
the state "stand-by" (the device is fed and it is out).
the state "on" (the device is fed, you/he/she has turned on and it is waiting for the start of a cycle of
operation).
the state "run" (the device is fed, you/he/she has turned on and a cycle of operation is in progress).
the state “lighting of the device”, is the transition from the state “stand by” to the state “on”.
the state “turning of the device” is the transition from the state “on” to the state “stand by”.
If an interruption of the feeding occurs during the state "stand-by" or during the state "on", the restoration of the
feeding device will propose the same state.
If an interruption of the feeding occurs during the state "run", the restoration of the feeding device will work in
the following way:
if a temperature blast chilling cycle or a temperature blast freezing cycle was in progress, it will be
restarted from the beginning
if a time blast chilling cycle or a time blast freezing cycle was in progress, it will be restarted within 10
minutes of error occurrence
if a conservation cycle was in progress, the conservation cycle will start again.
b) Blast chiller switching on/off
If the blast chiller is turning on and shutting back off, please use the following steps:
1.
Please make sure that the keyboard is not jammed and that some procedure is not in progress.
2.
Please keep pressed the key START / STOP for 1 second: the LED will turn on and then back off.
