Page 17
6.8.3
Deleting cards (codes) „above or below“
If a user loses his ID medium, it is usually impossible to delete the ID from the memory with
the procedure described in the previous chapter, since the medium is no longer available
(with an exception of entering the code at the keypad). Following procedure can be used for
deleting such ID. The procedure
requires using an ID medium
, which was inserted
right
before or right after the ID medium
, which should be deleted.
Step 1
Step 2
Step 3
Read the programming card
(or enter the programming
code) for
inserting
: the reader
goes
into
programming
mode
, which is indicated by
slow flashing of yellow LED.
Read the programming card
for inserting 5 times in a row
(or enter the programming
code); the reader will go into
Deleting cards “above or
below”
mode indicated by fast
flashing of yellow LED.
Read a card (or enter a code),
which is located in the
module’s memory
right before
or right after
the card you wish
to delete. After this step the
module quickly flashes with
yellow LED.
Step
4 - A
Step
4 - B
Step 5
For deleting an ID located
right before
the ID used in
precious
step,
read
the
programming
card
for
deleting
(or
enter
the
programming code).
For deleting an ID located
right after
the ID used in
precious
step,
read
the
programming
card
for
inserting
(or
enter
the
programming code).
The reader module goes back
into
standard
operating
mode
.
Pic.5 c): Deleting cards (codes) “above or below”
