techem smoke detector 2, Operating Instructions Manual, Page: 18 / 60

Deactivation
To switch the alarm off for 15 minutes, also in case of false or spurious
alarms, press the user key until the alarm signal is silent and the short
signal tone sounds:
User key Red LED
Press the user key until the loud
warning tone is silenced Continues to flash every
2 seconds
!
During the 15 minute deactivation period, the smoke detector does not
recognise any smoke and therefore does not trigger any alarms.
After expiry of the deactivation, the smoke detector automatically returns
to standard operation mode.
Spurious alarms
Spurious alarms often have the following causes:
• Dust due to construction work or cleaning work,
• Sawing and grinding work,
• Steam,
• Cooking vapours,
• Temperature fluctuation (= condensation of humidity),
• Welding and separation work,
• Soldering and other high-temperature processes.
!
In order to avoid spurious alarms and/or soiling the smoke detec-
tors, please observe the information in the section ”What to do
when carrying out renovation work?”
Techem radio frequency smoke detector 2 – operating instructions 18