32
TS8200D Series
Micro-Meter Mix User Guide
Recommended Cleaning Tools
1.
Cleaning Tools included with cleaning kit
a.
Brush,
Small, 0.15” (3.8
mm)
b.
Brush,
Large, 0.45” (11.4
mm)
2.
Cotton swabs
3.
Scrapping spatula
4.
Fine point tweezers
5.
Cleaning towels
Pump Cleaning Process
1.
Use cleaning towels to remove excess material from the surface of all wetted
parts.
Tip:
Never use the same cleaning towel for both process fluids. Mixing the fluids may
lead to undesired chemical reactions.
2.
Use tweezers to remove O-rings and to remove dried/hardened material from
the side walls of the fluid housings.
3.
Use scrapping spatula to remove any cured or dried material stuck to the stator
housing’s side walls
, fluid manifold, or to the base of the shaft seal block.
