21
TS8200D Series
Micro-Meter Mix User Guide
ii.
To purge the hardener though the manifold:
1.
Navigate to the Home page.
2.
Unlock the unit by clicking lock icon.
Default password = 0000.
3.
Select the Purge Pump 2 icon.
Note:
Purge Pump 2 icon will dispense the hardener at a safe speed for initial priming
of the pump.
4.
Press the foot switch
5.
Allow the fluid to flow from the manifold until a steady
stream of air-free material is observed.
6.
Release the foot switch.
7.
We are now done purging pump 2.
iii.
To vent the hardener:
1.
Have a cleaning towel or container under the pump ready
to catch material
