ST – 480
You can start the motor of your selected device by pressing the
pulser
.
The device will remain activated until the
pulser
is pressed again.
Additionally, an option to control the
blowing power
is available where you
can set any fan speed in manual mode.
II.4. Weekly control
The function is used to programme daily changes in the boiler
temperature. The preset temperature deviations are within the range of
+/-100C.
Step #1:
The user needs to set current time and date first (Installer menu >
Clock).
Step #2:
The user sets temperature values for individual days of the week (Set
mode 1):
Monday– Sunday
Select specific hours and required deviations from the preset temperature
(how many degrees the temperature should rise or drop) for each day of
the week. Additionally, the preset values can be copied to facilitate the
operation.
Example
Monday
preset: 3 00 , temp. -10°C (temperature change– 10°C)
preset: 4 00 , temp. -10°C (temperature change – 10°C)
preset: 5 00 , temp. -10°C (temperature change – 10°C)
In such a case, if the temperature preset on the boiler is 60ºC, it will
drop 10ºC to 50ºC between 3 a.m. and 6 a.m. on Monday.
- 8 -
