Appendix A – Changing the Console Resolution
A-5
35
1920X1080X60
36
1920X1080X72*
37
1920X1080X80
38
1920X1200@60
39
1920X1200@70
40
1920X1200@76
NOTE:
Please refer to Appendix C for a description of
nvedit
commands.
ok
nvedit
0:
8 value video-mode
1:
<ctrl-c>
ok
nvstore
ok
setenv use-nvramrc? true
ok
reset-all
NOTE:
The last three commands enable the NVRAM. Without
these lines, the changes you make with
nvedit
will be ignored.
A.4 Video-Timing Method
If all of the previously described methods fail for your
configuration, it is possible to specify the exact timing numbers
for a particular resolution. The last method for setting the
console resolution also uses
nvedit
. This method is more
involved and requires knowledge of all timing parameters for the
desired resolution, and is only meant for monitors whose
resolutions are not available in the
video-mode
method.
Please refer to Appendix C for detailed instructions on using
nvedit
.
NOTE:
The video-timing method should be used
only
if the
previous methods have been unsuccessful.
NOTE:
The resolution followed by a * uses composite sync.
Summary of Contents for GFX 400 series
