manualshive.com logo in svg

Tech Source GFX 400 series, Installation And Reference Manual, Page: 20 / 60

Share
Download
Tech Source GFX 400 series Installation And Reference Manual Download Page 20

GFX 400 Series Installation and Reference Manual 

 

3-8 

 

-cachedpixmap TRUE|FALSE

   Turn off the off-screen 

cached pixmap feature. 
Default is 

TRUE

. 

 

-propt

 

displays current settings 

 

-prconf 

displays hardware 
information 

 

-help

 

shows complete usage 
listing 

 
 

NOTE:

  By default, the bit depth will be set to 8+24 for all 

resolutions. 
 

3.4.2.1 Examples   

 
To configure the resolution on the GFX 400 card to 
1152x900@66Hz, type the following: 
 

prompt# 

mkoconfig -res 1152x900x66

 

 

NOTE: 

 If no device is specified, 

mkoconfig

 configures the 

console (assuming that the console is a GFX 400 card). 
 
To verify the resolution prior to setting it permanently, add the 
word  "try" after the resolution name.  This option will display a 
test pattern on the screen until a return key is hit.  Then the 
resolution can be accepted or rejected.  For example: 
 

prompt# 

mkoconfig -dev /dev/fbs/mko0 \  

 

–res 1152x900x66 try 

Summary of Contents for GFX 400 series





























































Reviews:

No comments