manualshive.com logo in svg

Tech Source GFX 400 series, Installation And Reference Manual, Page: 37 / 60

Share
Download
Tech Source GFX 400 series Installation And Reference Manual Download Page 37

7-1 

Chapter 7 

 

TECHNICAL ASSISTANCE 

7.1  Who to Call for Help  

 
If you need help, please call our Technical Support Team at 
(800) 330-8301, or directly at (407) 262-7100 between the hours 
of 

9:30am - 5:30pm EST

 Monday through Friday. 

 
Please have the software part number, version, and serial 
number for your  GFX  card(s) available when contacting Tech 
Source in order to expedite support.  Please make a note of this 
information in the area below: 
 

DETAILS OF YOUR CARD(S): 
 
P/N: 

_________________________________ 

 
Model Name:  ___________________________ 
 
Serial Number(s):

 

 ____________________ 

 

 
 
 
 
 
 

7.2  Email Address 

 

Our email address is 

[email protected]

. 

 

International customers may use email or our fax line at 
(407)339-2554. 

NOTE:

 Technical Assistance will be available only for 

products under standard or extended warranty. 

Summary of Contents for GFX 400 series





























































Reviews:

No comments