VEGA KS ( 1/2/3) KVA MANUAL
12
It is the same with the installation of the front cover. (Refer” To install the
UPS“)
Figure8Removing the EBP Front Cover
b)
On the bottom of the UPS front cover, remove the EBP cableknockout (see Figure
9).
Figure9Removing the UPS Cable Knockout
c)
For the bottom (or only) EBP, remove the EBP cable knockout on the top of the
EBP front cover. See Figure 10 for the location of thetop EBP cable knockout.
d)
If you are installing more than one EBP, for each additional EBP remove the EBP
cable knockout on the top andbottom of the EBP front cover. See Figure 10 for
the location of the EBP cableknockouts.
CAUTION
A small amount of arcing may occur when connecting an EBP to the UPS. This is
normal andwill not harm personnel. Insert the EBP cable into the UPS battery
connector quickly andfirmly.
e)
Plug the EBP cable(s) into the battery connector(s) as shown inFigure 10. Up to
