TECH-MED KARDIO-TEST KTN-01, User Manual

Page: 29 / 64

- 5 -
1. Inserting the batteries
a) Insert the batteries (2 x size AAA 1.5V), thereby observing the indicated
polarity.
b) If the battery warning appears in the display, the batteries are empty
and must be replaced by new ones.
Attention!
• After the battery warning
appears, the device is blocked until the
batteries have been replaced.
• Please use «AAA» Long-Life or Alkaline 1.5V Batteries. The use of 1.2V
Accumulators is not recommended.
• If the blood-pressure monitor is left unused for long periods, please remo-
ve the batteries from the device.
2. Reading the set date
Please press the
button. The date will be shown in the display.
3. User selection and setting the time, date,
User selection:
This advanced blood pressure monitor allows
you to track blood pressure readings for 2 indi-
viduals independently.
a) Before measurement, make sure you set the
unit for the intended user. The unit can track
results for 2 individuals. (User 1, User 2)
b) Press the
button for at least 3 se-
conds.
The display now indicates the set user,
during which the set user blink. To confirm,
press ON/OFF button .
c) Click the button to select User
d) We suggest the first person to take their
pressure to be User 1.
PUTTING THE BLOOD-PRESSURE
MONITOR INTO OPERATION