background image

EU-293 user’s manual 

 

I.

 

SAFETY 

Before using the device for the first time the user should read the following regulations carefully. Not obeying the rules 
included in this manual may lead to personal injuries or controller damage. The user’s manual should be stored in a safe 
place for further reference. 

 In order to avoid accidents and errors it should be ensured that every person using the device has familiarized 
themselves with the principle of operation as well as security functions of the controller. If the device is to be sold or 
put in a different place, make sure that the user’s manual is there with the device so that any potential user has access 
to essential information about the device. 

The manufacturer does not accept responsibility for any injuries or damage resulting from negligence; therefore, users 
are obliged to take the necessary safety measures listed in this manual to protect their lives and property.  

       

  WARNING 

 

A live electrical device! Make sure the regulator is disconnected from the mains before performing any 
activities involving the power supply (plugging cables, installing the device etc.) 

 

The device should be installed by a qualified electrician. 

 

The device should not be operated by children. 

 

  WARNING 

 

The device may be damaged if struck by a lightning. Make sure the plug is disconnected from the power 
supply during a thunderstorm. 

 

Any use other than specified by the manufacturer is forbidden. 

 

The device should be periodically checked. 

 

 

Changes  in  the  merchandise  described  in  the  manual  may  have  been  introduced  subsequent  to  its  completion  on 
17.05.2021. The manufacturer retains the right to introduce changes to the structure or colours. The illustrations may 
include additional equipment. Print technology may result in differences in the colours shown.  

 

We are committed to protecting the environment. Manufacturing electronic devices imposes an 
obligation  of  providing  for  environmentally  safe  disposal  of  used  electronic  components  and 
devices. Hence, we have been entered into a register kept by the Inspection for Environmental 
Protection.  The  crossed-out  bin  symbol  on  a  product  means  that  the  product  may  not  be 
disposed of to household waste containers. Recycling of waste helps to protect the environment. 
The user is obliged to transfer their used equipment to a collection point where all electric and 
electronic components will be recycled. 

 

 

 

Summary of Contents for EU-293v2

























Reviews: