TECH
10
NOTE
In order for the floor heating functions to be available in the controller menu, an additional sensor must be
connected to the floor sensor contact.
2.
OPERATION MODES
The room regulator may operate in one of the following operation modes:
Day/night mode
In this mode the pre-set temperature value depends on the current time of the day. The user may set different
temperature values for the daytime and nighttime (comfort temperature and economical temperature) as well as define
the exact time of entering day mode and night mode.
In order to activate this mode, press EXIT button until day/night mode icon appears on the main screen.
Weekly control
This mode enables the user to define the time when the pre-set comfort temperature and the pre-set economical
temperature will apply.
The user may set 9 different programs divided into three groups:
-
PROGRAMS 1÷3
– daily temperature values are set for all days of the week;
-
PROGRAMS 4÷6
– daily temperature values are set separately for the weekdays (Monday-Friday) and for the
weekend (Saturday-Sunday);
-
PROGRAMS 7÷9
– daily temperature values are set for each day of the week separately.
* The display shows the hours when the comfort temperature applies. In the remaining time period economical
temperature applies.
day/night mode icon
Weekly control icon
Number of the current
weekly control program
Parameters of the
current weekly control
program*
Summary of Contents for EU-293 B v3
Page 1: ...EU 293 User manual 1 EU 293v3...
Page 24: ...TECH 24...
