15
After selecting the day of the week, a panel for setting temperature deviations in selected time intervals is displayed.
1.
Decrease temperature
2.
Copy temperature deviation to next hours
3.
Increase temperature
4.
Change time period backwards
5.
Change time period forwards
6.
Time period bar (24 hours)
Copy icon enables the user to copy the whole day settings into another day.
6.
CH BOILER CONTROL
The parameters in this submenu may differ depending on the type of the main controller.
A)
STANDARD CONTROLLER SUBMENU
Pre-set temperature – Tap on this icon to change the pre-set CH boiler temperature (it may also be done by
tapping on parameters panel in the main screen view).
Operation modes – Tap on this icon to choose one of the following pump operation modes (in the CH boiler
controller): House heating, Water tank priority, Parallel pumps or Summer mode. Detailed description of
particular operation modes may be found in the CH boiler controller manual.
B)
PELLET CONTROLLER SU BMENU
Pre-set temperature - Tap on this icon to change the pre-set CH boiler temperature (it may also be done by
tapping on parameters panel in the main screen view).
Fire-up – Tap on this icon to initialise CH boiler fire-up process.
Damping – Tap on this icon to initialise CH boiler damping process.
5
1
2
3
4
6
