2
1
IMPORTANT SAFETY INSTRUCTIONS.
READ AND SAVE THESE INSTRUCTIONS.
HEED ALL WARNINGS.
This unit is powered by potentially hazardous voltage. Therefore,
observe the following safety precautions:
1.
Read and follow all instructions before
using product.
2.
Do not use product near water (such as
near a bathtub, washbowl, kitchen sink, swim-
ming pool, in a wet basement, etc.).
3.
Unit should be located so that its location
or position does not impede the flow of air
through the ventilation openings.
4.
Product should be located away from heat
sources such as radiators, heat registers, or
other products, including amplifiers, that pro-
duce heat.
5.
Product should be connected to a power
supply only of the type described in the operat-
ing instructions or as marked on the product.
6.
Protect the power cord from being walked
on or pinched, particularly at plugs, convenience receptacles, and the point where
they exit from the unit.
7.
Do not allow objects or liquids to penetrate the enclosure through openings.
8.
During heavy use, chassis may get hot to the touch. Handle with care.
9.
Protect unit from strong impact.
10.
Unplug product before cleaning. Never spray liquid cleaners into the amp: wipe
with a clean, lint-free cloth to remove dirt and film.
11.
Only use attachments/accessories specified by the manufacturer.
12.
This product should be used only with a cart or stand that is
recommended by the manufacturer. When a cart is used, use cau-
tion when moving the cart/product combination to avoid injury
from tipping over.
13.
Amplifiers may be capable of producing high volume levels
that could cause permanent hearing loss or damage, if the expo-
sure to such levels is prolonged. Such damage is progressive and irreversible! If you
experience any hearing loss or ringing in the ears, consult an audiologist.
This symbol, wherever it appears, alerts the user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol, wherever it appears, alerts the user to important operating and maintenance
instructions in the accompanying literature. Read the manual.
14.
Unplug unit during lightning storms or when unused for long periods of
time.
15.
This unit must be earth grounded. To reduce risk of electric shock, NEVER re-
move or attempt to defeat the ground pin of the power cord. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
WARNING:
To avoid the risk of fire, electric shock or injury, do not expose this unit
to rain or moisture. Do not remove the chassis from its cabinet, or remove metal cov-
ering from chassis parts. Removing the chassis from its cabinet exposes extremely
dangerous high voltages. There are no user-serviceable parts inside. Hazardous volt-
ages are present inside the chassis. Refer all servicing to qualified personnel.
CAUTION:
Never modify the power cord. If original power cord becomes damaged,
frayed, or has exposed wires, replace immediately with same rating and gauge, or
higher. Replacements are commercially available or you can contact Tech 21 directly.
WARNING:
There are no user-serviceable parts inside. Attempting to repair this unit
is not recommended and may void its warranty. Refer all servicing to qualified per-
sonnel. NOTE: In the U.S. and Canada, servicing is performed at factory only. In other
countries, please refer repairs to the local Tech 21 authorized distributor.
FUSE
Fuse holder is located inside A/C cord receptacle.
You
must disconnect and remove power cord to change
fuse.
Replace with similar type and same value:
100V - 240V units use F 3.15A L
QUICK START AND STOP INSTRUCTIONS
Here’s how you can get your Power Engine Deuce Deluxe up and running before you
read the entire manual. Note: By not reading the manual, you’ll miss out on how to
get the most out of your new investment!
1. Before turning on any power or connecting any devices, be sure all volume con-
trols are at minimum.
2. Connect devices using appropriate inputs and outputs.
3. Turn on the preamp/processor first. Then turn on the Power Engine.
4. Slowly bring up the volume controls, alternating between devices as you go, until
desired volume is achieved. If you don’t hear your instrument, check its volume control.
5. If there’s still no sound, recheck your connections and be sure your cable isn’t faulty.
Otherwise, refer to factory or qualified technician.
QUICK STOP:
After shutting off the Power Engine Deuce Deluxe (or any amplifier),
wait at least 10 seconds before turning it back on.
ZUR MINIMIERUNG ELEKTRISCHER SCHLAGGE-
F
POUR REDUIRE LES RISQUES D'ELECTROCUTION
N
ZUR MINIMIERUNG ELEKTRISCHER SCHLAGGE-
F
