tecan Te-VacS, Operating Manual

Page: 22 / 54

4 - Description of Function
Base Plate Vacuum Block
22 / 54 Tecan Vacuum Separator (Te-VacS™) Operating Manual, 391236, en, V4.0
4.3 Base Plate Vacuum Block
The base plate vacuum block consists of two basins, which may be equipped with
accessories used for the extraction processes (e.g., microplates, SPE cartridge
blocks, MALDI targets, etc.). The basins are pumped and vented independently of
each other.
4.4 Vacuum Block
The vacuum block is used to support the SPE cartridge blocks during the
extraction process. Depending on the specific processes different vacuum blocks
can be used.
A special application is given by the Pro Team Wash Adapter. This vacuum block
is vented via two ventilation valves. The ventilation valves are opened by the
gripping device during the unloading of the SPE cartridge block. The abrupt
ventilation of the vacuum block causes turbulences on the underside of the wash
adapter that tear off dangling drops.
4.5 Spacers
The spacer is used to decrease the distance between SPE cartridge block and the
collection plate in order to avoid cross contamination.
4.6 Optional Accessories
A
B
Illustration 5: Optional accessories
• Park position (A): A park position with positioning pins for the vacuum blocks
can be fixed on the front side of the vacuum block.
• Plate waste (B): Ramp for the disposal of used labware.
4.7 Operating Elements and Displays
The Te-VacS has no operating or display elements of its own.
It is switched on and off by means of the main switch of the instrument. All
commands and feedback information are handled via the application or setup and
service software modules and their interfaces.
For more information please consult the corresponding Operating Manual of the
instrument. Refer to section
“Reference Documents” [
}
8] .