TEC MA-1535-2 series Owner'S Manual Download Page 71

Page: 71 / 150

12. GENERAL MAINTENANCE

EO1-11149

12.1 Removing Jammed Paper

12- 1

12. GENERAL MAINTENANCE

WARNING!

Care must be taken not to injure yourself with the paper cutter.

12.1 Removing Jammed Paper

1. Turn the Control Lock to the OFF position using the Mode

Selector Key.

2. To remove the Printer Cover, inset the Printer Cover Key to

the Printer Cover Lock, and then turn it clockwise.

3. Open the Cutter Unit when the paper jam occurred in the

Receipt Printer. Move the Paper Free Lever in the
direction of the arrow, and remove the jammed paper.

4. Return the Paper Free Lever in position. Close the Cutter

Unit for the Receipt Printer.

Re-load the Paper Roll. (Refer to Section 8 INSTALLING
AND REPLACING THE RECEIPT AND JOURNAL
ROLLS.)

Summary of Contents for MA-1535-2 series























































































































































Search results

Summary of Contents for MA-1535-2 series

Reviews:

Related manuals for MA-1535-2 series

Brands by name

Popular brands

TEC MA-1535-2 series, Owner'S Manual

Search results

Summary of Contents for MA-1535-2 series

Reviews:

Related manuals for MA-1535-2 series

Brands by name

Popular brands