TDIM1_4_User Manual_1
30
This section provides you with information in connection with external
influences or environmental conditions that you may encounter when using
your InnoMake.
Temperature
▪
Since the attachment part electronics are equipped with overheating
protection, it may happen that an attachment part switches itself off due
to high environmental temperatures (see section 4.10). This not only
protects you, but also the attachment part battery.
▪
Protect your InnoMake against direct sunlight during storage and
transportation.
▪
The detailed permissible temperature ranges of the environmental
conditions can be found in the technical data in section 7.
Humidity
▪
Extreme influences of nature, such as downpours and muddy surfaces
can result in functional impairments.
▪
Your InnoMake is not protected against salt water. However, should your
InnoMake come into contact with salt water, use a damp cloth to clean
the attachment parts of your InnoMake.
▪
Dry your InnoMake with a cloth if it is wet after use. Remove the
attachment parts from the shoe compartments and let them air dry
completely. In addition, please open the USB socket cover and place the
attachment parts on their left side with the open USB socket at the
bottom. This will drain any accumulated water out of the watertight USB
socket and dry it.
If the attachment parts of your InnoMake do not switch on after contact with
water or other liquids, or if a continuous vibration is emitted after switching
on, make sure to contact your retailer and stop using your InnoMake. The
protection against temporary submersion might not be able to be maintained
due to external damage to the casing.
