TDIM1_4_User Manual_1
21
Since we are all on the move in different and changing environments, you
have the possibility of changing the measurement range of your InnoMake for
each attachment part separately and adjusting for your use.
The distance to objects can be provided as feedback between 0.3 and 1.5
metres or between 0.3 and 4.0 metres.
You can change between the measurement ranges with the push button on
the back of the attachment part in the operational state.
A short press of the button is enough to change the measurement range.
Your setting adjustment will be confirmed as follows:
▪
2 identical, short tones indicate a measurement range of 1.5 metres
▪
3 identical, short tones indicate a measurement range of 4.0 metres.
You can switch between the measurement ranges as many times as you like.
In order to avoid damaging the casing, do not use too much force when
pressing the push button.
N
O T E
:
Stand still while adjusting the settings. Settings must not be adjusted
while walking and using the product.
The default setting of your InnoMake covers a measurement range of 1.5
metres on first use. Your InnoMake will keep your chosen measurement
range, even after interruption of the application. The setting chosen before
switching off will remain unchanged when switching on again.
Always wear the shoes with your InnoMake the right way round, i.e. the right
shoe on the right foot and the left shoe on the left foot. Since you can set the
measurement range for each shoe separately, it could cause unexpected
vibrational feedback if you wear the shoes the wrong way round.