TDIM1_4_User Manual_1
29
Malfunctions
Possible causes
Necessary action
Nearby sources of
interference in the same
frequency range of the
ultrasonic sensors, e.g. a
jingling keychain, other
ultrasonic sensors
Switch off and on again and
wait for operational state
An obstacle is
detected too late
The measurement range was
adjusted immediately before
detecting the obstacle
Stand still while adjusting the
settings
Complete loss of
function and
deactivation of
InnoMake
Attachment part overheated
Take the shoes off and let the
InnoMake cool down before
touching it again, meanwhile
avoid skin contact
Battery empty
Charge the battery
Sources of electrical or
(electro)magnetic
disturbances cause the
system to fail
Switch your InnoMake on
again, your InnoMake
settings and functions will
remain unchanged
No warning tone
before automatic
deactivation
Software error
Contact your retailer
No LED feedback
when charging
the battery
Attachment part possibly
overheated, charging was
ended automatically
Let the InnoMake cool down
before touching it again;
meanwhile avoid skin contact;
charge InnoMake in a cooled
down state
Operational
state is not
restored
Software error
Switch off and on again,
charge the battery
beforehand if necessary
N
O T E
:
Should your InnoMake behave in a way that you cannot understand or if
there are lasting, unexpected malfunctions, please contact your retailer.
5.2. Information and measures in case of environmental influences
