TEC Industry and Trade Co.,Ltd
TJ-4080 UV Printer User Manual
Chapter 5. Power on machine
As Frigga support print by flatbed and rotary two motion method, so different printing method use different power on way, if
print by flatbed way, then the rotary device will not working, and if print by rotary device, then the flatbed will not working.
5.1 Power on for print by flatbed motion way
1. Power on the general power button:
1.
Press down the motion transit button at the right side of the printer to transit the motion signal to flatbed motor:
(If the carriage
and flatbed get locked already that can not moved by push by hand, then no need press)
3. Press UP/DOWN to adjust the flatbed gap between print head and flatbed, be sure the flatbed will not scratch the print head,
Please must do this step to avoid the print head get scratched without attention!
28
