This shows the correct anti-rotational and washer
arrangement. If you are unsure have a qualified
bicycle technician look at your tricycle.
Fork Failure
from improper installation is
NOT
a warrantable
claim.
Connect the motor plug to the motor cable present in
the frame. Ensure that this plug is seated correctly
and pushed all the way home. There are alignment
arrows and the plug must be pushed into the socket
until it reaches the indicator line on the plug.
We like to attach the wheels to the rear section
before connecting the two halves of the tricycle. One
of the wheels has a keyway that matches the driven
side of the axle. Ensure this is lined up and the tread
direction of the tyre is correct. Make sure to leave the
spacers in place.
Then add the washer, spring washer and nut and
tighten. This can be repeated for the freewheeling
side. Ensure that both wheels still spin freely once
the nuts are tight.
Now we can attach the two halves of the tricycle.
There are 4 bolts provided. Ensure that you use
The front half of the tricycle sits on the outside of the
connection. Use a 17mm spanner to tighten these
