12
4.5
Menu
Push P3 button to enter in the User Menu
Using P4 and P6 buttons it is possible to select the desired Menu or Submenu. Push P3 button to
enter in desired Menu or Submenu.
To decrease or increase value push the buttons P4 or P6; to save the new vale push the button P3; to
cancel the modifies and restore the old parameter’s value push the button P1.
If a parameter value is changed, the new value is sent to the control board; if the transmission
failures appears the message “Transfer not successful”: in this case modify again the parameter’s
value.
4.5.1
Combustion Power Menu
This Menu allows to set the system’s combustion in automatic or manual mode (in this case it is
possible to set the combustion power).
4.5.2
Heating Power Menu
This Menu allows to manage the system’s heating in automatic or manual mode (in this case it is
possible to set the heating power).
If the user chooses the automatic mode, the heating is proportional to the exhaust temperature or to
the room temperature or equal to the combustion power.
4.5.3
Boiler Thermostat Menu
Menu which allows to modify the Boiler Thermostat’s value. It is possible to program the minimum
and the maximum value of the Boiler Thermostat setting the
Th26
and
Th27
Thermostats.
4.5.4
Buffer Thermostat Menu
Menu which allows to modify the Buffer Thermostat’s value. This Menu is visible only setting
a plumbing plant with a Buffer probe.
