Start and stop of riding
When Teasi Core is prepared for work, the prompt box as shown in the left figure will be displayed on the screen;
when riding is suspended, the prompt box as shown in the right figure will be displayed on the screen;
Menu setting
In normal working state, long press
for 1 sec (release the button after hearing Buzzer sounds once) to enter
settings menu where corresponding parameters can be set; refer to button function list for button operation mode
and function list. Exit settings menu: long press
for 1 sec (release the button after hearing Buzzer sounds
once) to exit settings menu.
Wheel size setting
In the table below, you can find the wheel size (L) of your tire, or the actually measured wheel size (L) of your
bike.
How to measure wheel size (L): in order to obtain accurate measurement, you can make a tire roller. Place the
valve stem of the tire in normal pressure down, and mark on the ground. With the pedaling load of rider applied,
make the tire roll one circle (until the valve steam returns down on the ground) in a straight line. Then mark the
position of valve stem and measure the distance in millimeter dimension.
* The following table is for your reference.
