Phone
Water
Over speed
This product will enter standby mode automatically after riding is stopped for 3 min, as shown in the figure below;
it will return to the previous interface automatically after riding starts again;
Ⅱ
. Stopwatch Working Mode
This product will seek to connect with Tuhuna after it is started, as shown in the left of the figure below; if you do
not want to connect with Tuhuna or Tuhuna has stopped working, you can press the far left button to EXIT and
enter stopwatch working mode.
If Teasi Core has connected to Tahuna successfully and is in working mode currently, users should select
disconnect in the sensors page of Tahuna to return to the searching mode; then select EXIT to exit and enter the
independent working mode of stopwatch;
At this moment, it is needed to pair HR monitor and speed/ cadence sensor and connect them;
Pairing method for sensors and Teasi Core
Long press
for 2 sec and then release it after hearing the buzzer sounds twice, then the Teasi Core will enter
the mode to pair and connect with sensor; after the following interface is shown, short press
to search sensor;
when one sensor is searched, its name will be displayed and the equipment will connection to it automatically;
short press
at this time to start searching the next sensor. After the 2 sensors are searched, short press
