Teamtex SEATY 360, Manual

Page: 30 / 124

Step 3: Pass the Top -Tether through the blue seatbelt guide on one side of the child safety
seat’s shell, fasten the Top - Tether to the fastening point of your vehicle (fastening point
indicated in you car’s user manual). Tighten the Top -Tether strap, the tension indicator
should be green. Next pass the free strand of the Top-Tether through the blue seatbelt guide
on the other side of the child safety seat.
Then pass the free strand through the gap located at the back of seat behind the headrest
(illustration 1) then through the metal plate (illustration 2), pull and fold back (illustration 3) to
secure the strap strand. Re-tighten the Top-Tether strap and the strap strand if necessary
(illustration 4). The tension indicator should be green, indicating that the Top -Tether is
sufficiently tight.
Step 4: Place your child in the child safety seat, use the 5-point harness to secure your child.
Buckle and properly tighten the harness, make sure the height of the shoulder straps and
the headrest are properly adjusted (refer to points 4.2, 4.3, 4.4, 4.5). Make sure the harness
straps are not twisted and are sufficiently tightened.
Installation method no.2: vehicle’s 3 -point safety belt
For children weighing from 9 to 18 kg, FORWARD-FACING installation.
Step 1: As illustrated below, pass your vehicle’s 3 -point seat belt through the seatbelt guides
of the child safety seat, fasten and firmly tighten the seatbelt. Make sure the vehicle’ s
seatbelt is well tightened and that it is not twisted.
Step 2: Place your child in the child safety seat, use the 5-point harness to secure your child.
Buckle and properly tighten the harness, make sure the straps are not twisted and that the
height is a djusted to suit your child (refer to points 4.2, 4.3, 4.4, 4.5).
Installation method no.3: vehicle’s 3 -point safety belt
For children weighing from 9 to 18 kg, FORWARD-FACING installation.
Step 1: Use the ISOFIX clips to fasten the child safety seat in place. Make sure they are
properly locked, the indicators for each clip should be green. Then push the child safety seat
back until it comes into contact with the backrest of the vehicle’s seat (refer to points 4.6 and
4.7).
Step 2: As illustrated below, pass your vehicle’s 3 -point seat belt through the seatbelt guides
of the child safety seat, fasten and firmly tighten the seatbelt. Make sure the vehicle’s
seatbelt is well tightened and that it is not twisted.
Step 3: Place your child in the child safety seat, use the 5-point harness to secure your child.
Buckle and properly tighten the harness, make sure the straps are not twisted and that the
height is adjusted to suit your child (refer to points 4.2, 4.3, 4.4, 4.5).
30 31
EN