Teamtex SEATY 360, Manual

Page: 27 / 124

2. Loosening the harness:
The harness can be loosened by pressing on the metallic adjustment tab (under the
plastic adjuster cover).
Push down on the adjustment tab while the other hand grasps the two shoulder straps
and pulls to loosen them (illustration 2 below).
4.6 ISOFIX clips
As illustrated below, press the unlock button on the ISOFIX clips and push outwards then
extend the clips to the maximum.
If you wish to retract the ISOFIX clips, push them back into the seat while pressing the clips’
unlock button.
4.7 Installing the child safety seat using the ISOFIX clips
Step 1: Extend the ISOFIX clips to the full then insert them into the vehicle’s ISOFIX
attachments. You should hear a click when the clips fasten onto the attachments. Remark:
the locking indicators for the ISOFIX clips should be green to confirm they are locked.
Tighten
the
harness
Loosen
the
harness
Press the
unlock button
Step 2: Push the child safety seat firmly against the backrest of the vehicle’s rear seat. If you
wish to unfasten the seat, you can unlock the ISOFIX clips by pressing the red unlock
buttons. (See below).
You can also install the child safety seat using a 3 - point seatbelt (see specific installation
methods described at 5.1, 5.2 and 5.3).
4.8 Adjusting the inclination of the child safety seat
As shown in illustrations 1 and 2 below, the inclination of the seat can be adjusted by
operating the inclination adjustment lever. Certain types of installation require a specific
inclination of the child safety seat.
4.9 Swiveling the child safety seat
As illustrated on the next page, the seat can swivel through 360 degrees by pressing on the
swivel button, making it possible to choose the appropriate direction for the seat and to
facilitate the child’s installation.
Locked
To unlock
Click
Press
26 27
EN