17
Child installation
Adjust the headrest for your child’s height
(6)
. The adjustable headrest is designed to be used as your child grows up providing
maximum lateral protection. The headrest must be adjusted so that max. 1.5 cm (ca. one finger’s width) or less remains free be-
tween the child’s shoulder and the headrest
(7)
.
The seat can be positioned in 3 positions by pulling the reclining handle and pushing the seat forwards or backwards. Position the
seat in the correct position before positioning the child with the vehicle belt
(8)
.
Pull the car safety belt by threading the lap belt through the lap belt guides under the two armrests in line, and by threading the
diagonal belt under the armrest on the side of the fastener buckle
(9)
. Tighten the vehicle seat belt. Ensure that the belt is tight
enough and not twisted.
Removing the child car seat
Release the car seat belt. Remove the diagonal part of the belt from the guide
(10)
. If the child car seat has also been fastened with
the ISOFIX connectors, it is necessary to release them from the ISOFIX anchors using the release button
(11)
.
Maintenance advice
All the fabric parts are removable. Minor stains can be removed using a sponge and soapy water or hand-washed at 30°C in soapy
water. Do not use bleach, do not iron, do not machine wash or tumble dry. The plastic parts can be cleaned with a damp cloth
and neutral detergent.
Removing the fabric cover
Remove the fabric cover of the headrest. The polystyrene parts of the headrest may not be removed. Remove the car seat cover.
To put the cover back on the seat, reverse the process.
EN
