Teamline 5250
Page 28
Teamline 5250 safety and compliance information
Rack mounting
Read the rack mounting instructions carefully before you rack mount the
Teamline 5250. Ensure that the rack will remain stable.
Servicing
Do not remove the cover of the Teamline 5250. There are no user-serviceable
parts. If you open the Teamline 5250 or remove its cover you may expose
yourself to dangerous voltages or other hazards, and you will invalidate the
warranty.
Power requirements
Over-current protection
Ensure the power supply to the Teamline 5250 is protected by a branch circuit
protector rated by a maximum of 20A.
Caution
—over-current devices must meet applicable national and local
electrical safety codes and be approved for the intended application.
The table below shows the power ratings of the Teamline 5250:
Table 1: AC power ratings
Rating
Value
Supply voltage range
100 to 240V 50/60 Hz
Current rating
5A maximum
Operating environment
The Teamline 5250 must only be used indoors and within the following
environmental conditions:
Table 2: Operating environment
Environment
Temperature
Humidity
Operating environment
0°C to 35°C
10% to 95% (non-condensing)
Non-operating environment
-10°C to 60°C
10% to 95% (non-condensing)
Approvals information
EU/EEC
COMPLIANCE MODEL: MEK01A
