Teamline 5250
Page 26
VISCA cable requirements
Camera cables
Teamline systems that include PTZ cameras are provided with 5 meter
connection cables. To install cameras further than 5 meters from the system,
you can extend cables using a third-party product called an
extender
. This
product effectively carries the media and camera-control signals across a
cat 6 Ethernet cable.
StarLeaf has partnered with Sound Control Technologies to provide this
solution, and is available at
http://www.soundcontrol.net/solutions/#
VISCA cable requirements
If you need to use a longer VISCA cable than the one provided with the
Teamline room system, refer to the following cable requirements:
n
VISCA cables are available in crossed and straight-through configurations;
Teamline room systems require straight-through cable
n
The plugs should seat well into the socket on the rear of the room system. On
some room systems, the sockets are slightly recessed behind the back panel;
take care that cables with larger shrouds on the connectors are seated
correctly into the sockets (you may need to modify the cables)
Pinout
The following diagram shows the pinout for the Camera Control connector on
the rear of the Teamline room system:
Pin
Function
Direction on the Teamline system
1
MD
Output
2
IR
Input
3
GND
-
4
TX
Output
